This Question Arises in the Mind Of Every Chainsaw Owner Why is My Chainsaw Hard To Pull? There could be several reasons why your chainsaw is hard to pull.
It could be due to a problem with the fuel mixture, the spark plug, the air filter, or the chainsaw itself may be damaged or in need of maintenance. It is also possible that the chain may be too tight or there may be an obstruction in the bar or chain.
It is best to diagnose the issue by inspecting these various components and possibly consulting the chainsaw’s user manual or a small engine repair professional.
Contents
The Starter Housing damaged
The starter housing is a component that encloses the starter mechanism on a chainsaw. This includes the starter cord, the starter pulley, and the starter spring.
If the starter housing is damaged, it can cause the chainsaw to be difficult to pull start. The starter cord may get stuck or bind within the housing, preventing it from being pulled out smoothly.
The starter pulley may also become seized or damaged, making it difficult to turn and causing the starter cord to be difficult to pull. Finally, the starter spring may be damaged or broken, which can cause the starter cord to be harder to pull and return.
If the starter housing on your chainsaw is damaged, it will likely need to be repaired or replaced in order to resolve the issue of the chainsaw being hard to pull.
Pulley System Is Damaged
The pulley system on a chainsaw consists of the starter pulley, the starter cord, and the starter spring. If any of these components are damaged, it can cause the chainsaw to be difficult to pull start.
The starter pulley is a small wheel that is connected to the engine and turns when the starter cord is pulled. If the starter pulley is damaged or seized, it can be difficult to turn and may cause the starter cord to be hard to pull.
The starter cord is a strong braided cord that is used to turn the starter pulley and start the chainsaw. If the starter cord is damaged or frayed, it may be difficult to pull and may break while attempting to start the chainsaw.
The starter spring is a small spring that is used to help retract the starter cord after it has been pulled. If the starter spring is damaged or broken, it can cause the starter cord to be hard to pull and return.
If the pulley system on your chainsaw is damaged, it will likely need to be repaired or replaced in order to resolve the issue of the chainsaw being hard to pull.
Old Rop
The starter cord, also known as the “rope,” is a crucial component of a chainsaw that is used to start the engine.
It is a strong braided cord that is attached to the starter pulley and the starter handle. When the starter handle is pulled, it turns the starter pulley and begins the process of starting the chainsaw.
If the starter cord is old, it may become frayed or damaged over time, which can cause it to be hard to pull and potentially break while attempting to start the chainsaw.
A damaged or frayed starter cord can also become stuck or bind within the starter housing, making it difficult to pull and potentially causing damage to the starter mechanism.
If the starter cord on your chainsaw is old and causing the chainsaw to be hard to pull, it will likely need to be replaced in order to resolve the issue.
Broken Starter Spring
The starter spring is a small spring that is located within the starter mechanism of a chainsaw. Its purpose is to help retract the starter cord after it has been pulled in order to start the chainsaw.
When the starter handle is released, the starter spring helps to pull the cord back into the starter housing.
If the starter spring is broken, it will not be able to properly retract the starter cord, which can cause the cord to become stuck or bind within the starter housing.
This can make it difficult to pull the starter cord and start the chainsaw. In addition, a broken starter spring can also cause the starter mechanism to malfunction and potentially cause damage to other components within the starter housing.
If the starter spring on your chainsaw is broken, it will likely need to be replaced in order to resolve the issue of the chainsaw being hard to pull.
Old Chainsaw
There could be several reasons why an old chainsaw may be difficult to pull start. As a chainsaw age, it may require more maintenance and care in order to keep it running properly.
If an old chainsaw has not been properly maintained, it may experience issues such as a dirty air filter, stale or old fuel, or a damaged spark plug, which can all make it difficult to start.
In addition, an old chainsaw may also have worn or damaged internal components such as the starter mechanism or the crankcase seals, which can also cause starting issues.
If you believe that your old chainsaw is experiencing issues due to its age, it may be a good idea to have it inspected and serviced by a small engine repair professional. They will be able to diagnose any problems and recommend the necessary repairs to help get your chainsaw running smoothly again.
FAQ
What causes too much compression in a chainsaw?
Too much compression in a chainsaw can be caused by a dirty air filter or worn piston rings.
How can I make my chainsaw easier to start?
Use fresh fuel, clean the air filter, check the spark plug, and properly prime the carburetor.
How do you check the tension on a chainsaw?
Check the tension by pulling the chain away from the bar, it should have a slight give. Adjust as needed with the tensioning screw.